不同有机碱对铕-2-羟基喹啉-4-羧酸配合物发光性能的影响

分别在有机碱三乙胺、三丙胺和三丁胺的作用下,使用2-羟基喹啉-4-羧酸(H2hqc)与EuCl3·6H2O反应制备了3种配合物Eu(Hhqc)3(TEL)、Eu(Hhqc)3(TPL)和Eu(Hhqc)3(TBL)。通过元素分析、热重分析、摩尔电导率、紫外光谱、荧光光谱、荧光寿命和量子产率等对配合物进行了表征。所有配合物均在580,592,613,654,702 nm附近产生5条谱带,为Eu3+的特征发射,归属为5D0→7FJ(J=0,1,2,3,4)能级间的跃迁,荧光寿命分别为2.22,3.29,3.31 ms,量子产率分别为0.011,0.019,0.028。随着有机胺碳链长度的增加,配合物的荧光强度依次增大,表明有机碱参与了配合物的分子组成。     

Synthesis and physical properties of highly branched perfluorinated polymers from AB and AB2 monomers

Highly branched perfluorinated aromatic polyether copolymers were prepared from the polycondensation of the AB₂ monomer, 3,5‐bis[(pentafluorobenzyl)oxy]benzyl alcohol with a variety of fluoroaryl and alkyl bromide AB comonomers. The structures and comonomer distribution of the resulting polymers were characterized in detail. ¹H NMR data from kinetic trials illustrated that perfluoroaryl AB comonomer distribution correlated to AB comonomer sterics. ¹⁹F NMR data revealed that fluorinated AB monomers and 3‐bromo‐1‐propanol AB monomers were distributed within the AB₂ polymer backbone, while longer alkyl bromide AB monomers, 6‐bromo‐1‐hexanol, were mostly distributed along hyperbranched polymer chain ends. In general, as AB comonomer incorporation increased for nonsterically hindered copolymers, thermal decomposition onset increased and glass transition temperatures decreased. The combined data demonstrated the effect of comonomer distribution and sterics on physical properties of AB₂‐based polymer systems. The resulting materials were used to cast thin polymer films for measurement of contact angle, which were shown to be directly related to comonomer content. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1880–1894     

高压烧结制备Tb掺杂n型(Bi1–xTbx)2(Te0.9Se0.1)3合金及其微结构和热电性能

采用高压烧结技术制备了稀土元素Tb掺杂的n型Bi2Te2.7Se0.3基纳米晶块体热电材料.将高压烧结成型的样品于633 K真空退火36 h.研究了Tb掺杂量对样品的晶体结构和热电性能的影响.结果表明,高压烧结制备的样品为纳米结构, Tb掺杂使样品的晶胞体积变大,功率因子增大,热导率降低,从而使ZT值提高.Tb掺杂量为x=0.004是最优的掺杂量,该掺杂量的高压烧结样品经退火处理后,于373 K时ZT值达到最大为0.99,并且在323-473 K范围内, ZT值均大于0.8,这对用于温差发电领域具有重要意义.     

亲水性两性离子聚合物刷的构象与结构

本文应用分子场理论,研究暴露于水蒸气中的亲水性两性离子聚合物(HP)刷的构象与结构.理论模型考虑HP-水(P-W)氢键和水-水(W-W)氢键效应,以及HP单体之间的偶极-偶极相互作用.研究发现,P-W与W-W氢键决定着HP的水合性,P-W氢键形成,会诱导HP刷溶胀.我们通过考察HP单体间的偶极-偶极相互作用发现,随着偶极-偶极相互作用增强,HP链在垂直培基表面沿着链方向,形成了结节状结构.这是由于HP单体之间的偶极-偶极静电吸引作用导致单体间汇聚结节,这种结节在刷内产生了较强的排斥体积作用,因此,这种HP刷具有抗污性能.在较高的接枝密度环境下,由于HP链间单体之间的偶极-偶极静电吸引作用,会形成链间单体-单体的结节,在刷内形成结节网络状凝胶结构,这种结构的出现,会使得HP刷呈现极强的抗污性.另外,当体系中水蒸气浓度增加、水合相互作用增强时,增加的P-W氢键将平衡HP单体之间的偶极-偶极相互作用,使得结节解开,聚合物链伸展.我们的理论结果符合实验观测,由此表明,P-W氢键效应,以及HP单体之间的偶极-偶极相互作用决定着HP刷的构象转变和结构特性,刷内出现的两性离子聚合物链内单体间的结节和链间单体结节状凝胶结构,是两性离子聚合物刷呈现较强抗污性的本质特性.     

Benchmarking of Density Functionals for the Description of Optical Properties of Newly Synthesized π-Conjugated TADF Blue Emitters

Computational modeling of the optical characteristics of organic molecules with potential for thermally activated delayed fluorescence (TADF) may assist markedly the development of more efficient emitting materials for organic light-emitting diodes. Recent theoretical studies in this area employ mostly methods from density functional theory (DFT). In order to obtain accurate predictions within this approach, the choice of a proper functional is crucial. In the current study, we focus on testing the performance of a set of DFT functionals for estimation of the excitation and emission energy and the excited singlet-triplet energy gap of three newly synthesized compounds with capacity for TADF. The emitters are designed specifically to enable charge transfer by π-electron conjugation, at the same time possessing high-energy excited triplet states. The functionals chosen for testing are from various groups ranging from gradient-corrected through global hybrids to range-separated ones. The results show that the monitored optical properties are especially sensitive to how the long-range part of the exchange energy is treated within the functional. The accurate functional should also be able to provide well balanced distribution of the π-electrons among the molecular fragments. Global hybrids with moderate (less than 0.4) share of exact exchange (B3LYP, PBE0) and the meta-GGA HSE06 are outlined as the best performing methods for the systems under study. They can predict all important optical parameters correctly, both qualitatively and quantitatively.     

Highly Stable Univalent Copper of a Cu@Al/SBA-15 Nanocomposite Catalyzes the Synthesis of Fluorescent Aminobenzotriazoles Derivatives

With the development of green chemistry, it is still a challenge to maintain the unstable valence state of the metal in heterogeneous catalysts and realize new catalytic synthesis methods. In this paper, it is reported that an univalent copper nanocomposite (Cu@Al/SBA-15) can efficiently catalyze the formation of novel amino-containing benzotriazoles with great fluorescence properties in a new synthetic strategy. Subsequently, its application is further verified by an acylation reaction to produce a series of novel benzotriazoles derivatives with high yield. It is worth noting that the Cu@Al/SBA-15 nanocomposites not only enable the reaction completed with high yield in a short time, but can also be recycled many times without a significant reduction in activity, and the leaching of copper and aluminum species in reaction system is negligible. Finally, the detailed and feasible reaction mechanism is also provided.     

Metal-Mediated Directional Capping of Rod-Packing Metal–Organic Frameworks

Two new rod-packing metal–organic frameworks (RPMOF) are constructed by regulating the in situ formation of the capping agent. In CPM-s7, carboxylate linkers extend 1D manganese-oxide chains in four additional directions, forming 3D RPMOF. The substitution of Mn²⁺ with a stronger Lewis acidic Co²⁺, leads to an acceleration of the hydrolysis-prone sulfonate linker, resulting in presence of sulfate ions to reduce two out of the four carboxylate-extending directions, and thus forming a new 2D rod-packing CPM-s8. Density functional theory calculations and magnetization measurements reveal ferrimagnetic ordering of CPM-s8, signifying the potential of exploring 2D RPMOF for effective low-dimensional magnetic materials.     

Synthesis of Redox-Active Photochromic Phenanthrene Derivatives

A phenanthrene unit has been functionalized by several methylthiophene units in order to bring it a photochromic behavior. These compounds were characterized by NMR, absorption and emission spectroscopies, theoretical calculations as well as cyclic voltammetry. The association of a phenanthrene group with a photochromic center could open the door to a new generation of organic field-effect transistors.     

Planarized Phenyldithienylboranes: Effects of the Bridging Moieties and π-Extension on the Photophysical Properties and Lewis Acidity

Two kinds of planarized phenyldithienylboranes, which contain (CH₃)₂C- or CH₂-bridging moieties, were synthesized. The difference of the bridging moieties affects their packing structures and photophysical properties. In particular, the (CH₃)₂C-bridged derivative exhibits a large Stokes shift, unusual for such planarized compounds, that results from a large structural relaxation in the excited state. A series of π-extended derivatives was synthesized, among which a p-(diphenylamino)phenyl-substituted derivative shows large solvatochromism in the fluorescence spectra, while maintaining high quantum yields even in polar solvents. The Lewis acidity of the phenyldithienylborane derivatives was also assessed by titration with pyridine. The Lewis acidity of the boron center is affected not only by the difference in the steric bulk of the bridging moieties, but also by the electronic effect of the substituents introduced at remote positions relative to the boron atom. These results demonstrate the characteristic features of planarized phenyldithienylboranes as building blocks for boron-based π-electron materials.     

Cyclic Disulfide Liposomes for Membrane Functionalization and Cellular Delivery

Liposomes are effective therapeutic delivery nanocarriers due to their ability to encapsulate and enhance the pharmacokinetic properties of a wide range of therapeutics. Two primary areas in which improvement is needed for liposomal drug delivery is to enhance the ability to infiltrate cells and to facilitate derivatization of the liposome surface. Herein, we report a liposome platform incorporating a cyclic disulfide lipid (CDL) for the dual purpose of enhancing cell entry and functionalizing the liposome membrane through thiol-disulfide exchange. In order to accomplish this, CDL-1 and CDL-2 , composed of lipoic acid (LA) or asparagusic acid (AA) appended to a lipid scaffold, were designed and synthesized. A fluorescence-based microplate immobilization assay was implemented to show that these compounds enable convenient membrane decoration through reaction with thiol-functionalized small molecules. Additionally, fluorescence microscopy experiments indicated dramatic enhancements in cellular delivery when CDLs were incorporated within liposomes. These results demonstrate that multifunctional CDLs serve as an exciting liposome system for surface decoration and enhanced cellular delivery.